screw plug tubular heaters 1” 1/4

Screw-in tubular heaters are electro-thermal sets equipped with threaded plugs to heat up liquids. Power applications range from 750 W to 3000 W.

Standard applications include : recycled water heating for sanitary purposes depending on the specific load. Pipes are made of the following materials: INCOLOY-800; Plugs are made of BRASS. These are equipped with a high temperature-resistant gasket and with pre-wired connections (triangle or star type), as well as with electrical connection on threaded rod M4. Diameter of heating pipes: Ø 8,5.
All materials comply with RoHS European Directive.

All plugs are threaded on the connections side where the electrical connection housing is installed. The housing is made of aluminium, protection level IP 55, with or without adjustment or safety thermostat.

02_01_1TTL1X359

  • Incoloy-800 pins ø 8.5
  • 230 V single phase
  • Brazed pin on plug
  • Brass plug 1” ¼
  • Ideal for heating soft water, recycled water and water solutions
Item no.Power (W)Voltage (V) monoA (mm)B (mm)NC (mm)Specific load (W/cm²)Mass (Kg)
1TTL1X35900175023020539535.40.54
1TTL1X359002100023025039535.40.58
1TTL1X359003150023040039534.30.71
1TTL1X359004200023050039534.40.86
1TTL1X359005300023075039534.21.10